DeltaQuad Pro #INSPECT

Commercial grade VTOL UAV for Utilities, Wildlife and Disaster inspection. Covers up to 100KM in a single flight, fully autonomous and easy to control

 

 

To get a complete price based on your selected options and add-ons please use the configurator.

Prices starting at € 9.999

The DeltaQuad Pro #INSPECT is equipped with a downward facing camera sensor that can record video with GPS coordinates embedded. The vehicle is designed to house the Flir Duo Pro R Dual Thermal & RGB sensor, or the MapIR Survey3 RGB sensor. The vehicle flies fully autonomously along a planned path.

This versatile vehicle can be used for a wide range of inspection tasks including;

✔ Powerline inspection
✔ Pipeline monitoring
✔ Vegetation control
✔ Wildlife monitoring
✔ Disaster area reconnaissance
✔ Rail & Road monitoring

Key Features

✔ Fully autonomous from takeoff to landing
✔ Covering up to 150KM in a single flight with RGB sensor
✔ Covering up to 100KM in a single flight with Thermal & RGB sensor
✔ GPS embedded recording of video or images
✔ Terrain following corridor flights
✔ Both radio and 3G/LTE connectivity option
✔ Capable of missions beyond telemetry range
✔ Tool-less 1 minute field assembly
✔ No pre-flight calibrations required
✔ DSPS Advanced safety system
✔ DeltaQuad Simulator
✔ Online mission validation & log analysis tools

Payload options

The DeltaQuad Pro #INSPECT is available with the following camera sensors

Flir Duo Pro R Thermal & RGB sensor

The Flir Duo Pro R records 4K RGB and 640×512 Radiometric Thermal video or images with geo-coordinates

✔ Internal IMU and dedicated GPS
✔ 4K RGB video or interval images
✔ 640 x 512 Thermal (IR) video or interval images
✔ Thermal analysis suite

MapIR Survey3

The MapIR Survey3 can record 2K video or shoot 12MP images with geo-coordinates. It is available as RGB or NIR. This light weight camera allows for an additional battery giving the vehicle 50% more endurance.

✔ 2K Video recording
✔ Light weight (Auxiliary battery possible)
✔ Dedicated GPS

Compare camera payloads packages

The DeltaQuad Pro #INSPECT is available with either the Flir Duo Pro R, or the MapIR Survey3 RGB or NIR edition camera payloads. The following table provides a comparison of the key features for each sensor package.

MapIR Survey3

Flir Duo Pro R

RGB Resolution

MapIR Survey3

4000 x 3000

Flir Duo Pro R

4000 x 3000

Thermal resolution

MapIR Survey3

Flir Duo Pro R

640 x 512

Dedicated GPS

MapIR Survey3

Flir Duo Pro R

Internal Measurement Unit (IMU)

MapIR Survey3

Flir Duo Pro R

Auxiliary battery capable

MapIR Survey3

Flir Duo Pro R

DeltaQuad Pro #INSPECT VTOL Inspection UAV

Specifically designed to house a selection of inspection cameras

✔ Includes DSPS Advanced Safety System
✔ Includes DeltaQuad Simulator
✔ Includes Operation Manual & DeltaQuad Mission Validator
✔ Includes 4G FPV camera when 4G option selected

€ 9.999

Camera payloads

 

Flir Duo Pro R Thermal & RGB sensor

Flir Duo Pro R records 4K RGB and 9Hz 640×512 Radiometric Thermal sensor with external GPS and 2 64GB sd-cards.

With camera: € 7.900
Mount only: € 599

 
MapIR Survey3 RGB

MapIR Survey3 with Ublox M8N GPS, fully installed with automatic recording.

RGB version: € 799
NIR version: € 799

 

Transmission systems

 

20KM directional panel

Mounted on a tripod this system offers up to 20KM telemetry range.

€ 750

 

 
10KM omnidirectional ground system

The omnidirectional ground system offers up to 10KM telemetry range.

€ 499

 
4G VPN video & telemetry system

Using the 3G or 4G mobile network this unit provides a VPN secured telemetry link that can function as primary or backup link. The use of the mobile network provides virtually unlimited telemetry range. The unit is installed with a small nose camera that can stream ‘skype quality’ video when 4G/LTE data speeds are available.

€ 299

 

Ground Control Station

 

10.1″ Android Ground Control Station

This Samsung 4G capable Ground Control Station offers fast and smooth touch screen mission programming and vehicle control

€ 499

 

Options & Addons

 

Auxiliary LiPo module

The Auxiliary LiPo module allows for an additional battery that extends the endurance by 50% allowing up to 150KM autonomy and 160 minutes flight time.
Compatible with MapIR Survey3 models, battery not included

€ 99

 
DeltaQuad Rugged Flight Case

This rugged flight case is perfectly designed to safely transport your DeltaQuad UAV.

€ 699

 
DeltaQuad 23Ah high quality battery

The DeltaQuad 4S 23Ah Li-Po battery, produced by our partner MaxAmps is one of the highest quality batteries on the market.

€ 499

 

Technical specifications for the DeltaQuad Pro #INSPECT

To get a detailed overview of specifications for your selection, please request a quotation

DeltaQuad Pro #INSPECT general specifications
Dimensions: 
Wingspan235 cm
Length90 cm
Wing area90 sq. dm.
Standard box dimensions118 x 49 x 40 cm
Flightcase dimensions114 x 48 x 44 cm
Payload bay (occupied by camera payload)20 x 12 x 8 cm
  
Weight and Payload: 
Empty weight3.3 Kg
Empty weight including battery5 Kg
Maximum takeoff weight6.2 Kg
Payload capacity (occupied by camera payload)1.2 Kg
  
Flight Characteristics MapIR Survey3 
Cruise speed18 m/s (65 Km/h)
Maximum speed28 m/s (100 Km/h)
Stall speed12 m/s (43 Km/h)
Maximum flight time*2+ hours
Range through air*120 km
  
Flight Characteristics Flir Duo Pro R: 
Cruise speed16 m/s (60 Km/h)
Maximum speed25 m/s (90 Km/h)
Stall speed13 m/s (47 Km/h)
Maximum flight time*1 hour 50 minutes
Range through air*100 km
  
Flight Characteristics with Auxiliary LiPo: 
Payload capacity (occupied by camera payload)400 g
Maximum flight time*2 hour 45 minutes
Range through air*150 km
  
Power 
Battery typeLiPo
Battery cells4s
Battery capacity23Ah
  
Tolerances 
Maximum takeoff/landing wind**9 m/s (33 Km/h)
Maximum wind in cruise flight **12.5 m/s (45Km/h)
Maximum precipitationDrizzle
Operating temperatureBetween -20 and +40 Celsius
LiPo temperatureBetween +5 and +45 Celsius
Maximum altitude6500ft (2000m)

All flight characteristics are based on optimized settings at sea level

* These values assume 85% battery usage and low altitude include a vertical takeoff and landing
** These values are based on measurements at flight altitude, levels measured at ground level are usually 20% lower. Requires both a front and back transition into the wind

 

Flir Duo Pro R 640 9Hz
OVERVIEW
Dimensions
85 × 86.5 × 68.5 mm
Spectral Band
7.5 – 13.5 µm
Thermal Frame Rate
9 Hz
Thermal Imager
Uncooled VOx Microbolometer
Weight
375 g
Thermal Lens Options
25 mm: 25° x 20°
Thermal Sensitivty
<50 mK
Thermal Sensor Resolution Options
640 x 512
CONNECTIONS & COMMUNICATIONS
Digital Video Output
1080p60, 1080p30, 720p60
MAVLink Interface
Yes
Remote Control
Yes - PWM (3 channels), MAVLink
10 Pin Accessory Port
Power in, Analog Video Out, PWM, MAVLink, Frame Sync Out
Micro - HDMI
Digital Video Out
Mounting Features
1/4"–20 TPI Tripod Mounts (qty 2, bottom surface)
USB 3.0
Power in, USB Mass Storage
ENVIRONMENTAL & APPROVALS
Operating Temperature Range
-20°C to +50°C
Operational Altitude
+38,000 feet
Storage Temperature Range
-20°C to +60°C
IMAGING & OPTICAL
Global Positioning System [GPS]
Yes (GPS, GLONASS)
Multiple Color Palettes
Yes – Adjustable in App and via PWM
Visible Camera FOV
56° x 45°
Imaging Modes
IR-only, Vis-only, Picture-in-Picture (IR in Vis)
MSX Image Enhancement
Yes
Other Sensors
Accelerometer, Gyroscope, Magnetometer, Barometer
Visible Sensor Resolution
4000 x 3000
PERFORMANCE
Measurement Accuracy
+/- 5 C or 5% of readings in the -25°C to +135°C range +/- 20 C or 20% of readings in the -40°C to +550°C range
POWER
Input Voltage
5.5 - 26.0 VDC (10-pin JST Port) 5.0 VDC (USB-C Port)
Power Dissipation [avg]
10 W
MapIR Survey3
Image Resolution12 MegaPixel (4,000 x 3,000 px), 8MP
Image FormatRAW+JPG, JPG (RAW is 12bit per channel, JPG is 8bit per channel)
Video Resolution2160p24, 1440p30, 1080p60, 720p60
Video FormatMP4 (H.264 Codec)
Lens Optics41° HFOV (47mm) f/3.0 Aperture, -1% Extreme Low Distortion (Non-Fisheye) Glass Lens
Ground Sample Distance (GSD)2.3 cm/px (0.9in/px) at 120 m (~400 ft) AGL
SensorSony Exmor R IMX117 12MP (Bayer RGB)
ChipsetNovatek NTK96663
GPS/GNSS (External)ublox UBX-G7020-KT
Capture SpeedRAW+JPG: 2.75 Seconds / Photo.  JPG: 1.5 Seconds / Photo
Remote TriggerPWM via HDMI Port (see below)
BatteryRemovable Li-ion (1200mAh) (Not Required When USB Powered)
Power Draw5.2V 0.2A (Without Battery), 5.2V 0.4A (With Battery)
Weight50g (1.8 oz) (Without Battery), 76g (2.7 oz) (With Battery)
Dimensions59 x 41.5 x 36mm (Length x Height x Depth)
Memory StorageMicro SD (Up To 128GB Card) (64GB Card ≈ 15,000 JPG, 2,200 RAW+JPG)
White BalanceAuto / Daylight / Cloudy / Tungsten / Fluorescent / Blue / Light Blue / Red / Light Red / Custom*
Capture Interval0.5sec*, 1sec, 2sec, 5sec, 10sec, 30sec, 1min, 5min, 10min, 30min, 1hour, 2hours, 6hours, 12hours, 24hours
ISO50* / 100 / 200 / 400, Auto
Shutter Speed (s)1/2000, 1/1000*, 1/500, 1/250, 1/125, 1/90, 1/60, 1/30, 1/15, 1/8, 1, 2, 3, 5, 10, 15, 20, 30, 60, Auto
Exposure+2.0 / +1.67 / +1.33 / +1.0 / +0.67 / +0.33 / +0.0* / -0.33 / -0.67 / -1.0 / -1.33 / -1.67 / -2.0
MeteringAverage / Center* / Spot
ColorNormal* / Black and White / Sepia / Vivid
SharpnessStrong / Medium* / Soft
Capture ModeSingle* / 3 Sequence / 10 Sequence
LCD2.0” Ultra Bright Color LCD Touch Screen
Video OutHD 1080p (HDMI Micro), SD 480p (Optional USB FPV Cable)
TV ModeNTSC* / PAL
Power InputBattery, USB (Micro-A Cable Included, Optional Micro USB FPV Cable)
Auto Power On (When Power Applied to USB Port)ON* / OFF
OSD LanguageEnglish*, French, Spanish, Portuguese Brazil, Dutch, Czech, Polish, German, Italian, Chinese, Russian, Japanese, Korean
Frequency60Hz* / 50Hz
OSD DisplayON* / OFF
Date StampON / OFF*
SoundON* / OFF
Quick CaptureON / OFF*
Auto Power OffOFF* / 1min / 3min / 5min / 10min / 15min / 30min / 60min
Auto Sleep LCD1min* / 3min / 5min / OFF
Vertical RotateON / OFF*
Included AccessoriesUSB GPS Receiver, Battery, Lens Cap, USB Charge Cable, Manual

Request a quotation

To receive a full quotation with all technical specifications, prices and estimated shipping cost you can run the configurator. Through the configurator you can select your options and add-ons. In the final step you can leave your details and a quotation will be sent to you within one business day.

If you would like to discuss the available options or would like assistance in selecting your options please feel free to contact us.